Skoda Enyaq iV will be the first model of the Czech brand on the electric MEB platform. The length of the electric car is 4648 mm, width - 1877, and height 1618. The wheelbase is 2765 mm. The trunk holds 585 liters. The crossover is capable of towing a trailer weighing up to 1200 kg. In addition, the electric vehicle can boast a good drag coefficient of 0.27.
The Skoda Enyaq iV lineup will include five modifications. The base rear-wheel-drive version iV 50 will be equipped with a traction battery with a capacity of 55 kWh, as well as a 109-kilowatt electric motor (148 hp) on the rear axle. The range of the initial variant of the model is 340 km. The electric motor of the more powerful modification Enyaq iV 60 delivers 132 kilowatts (180 hp), and also has a battery of 62 kWh and a range of 390 km. The iV 80 version will offer a battery of 82 kWh, an electric motor of 150 kilowatts (204 hp) and a range of up to 500 km.
In addition, the Enyaq iV will have two all-wheel-drive modifications: 80X and vRS. Both versions are equipped with a battery with a capacity of 82 kWh and two electric motors with a combined output of 195 and 225 kWh, respectively (265 and 306 hp). The top variant vRS will need 6.2 seconds to accelerate to the first hundred, and the maximum speed will be 180 km/h. The range of all-wheel-drive electric cars is the same - 460 km (according to the WLTP cycle).
You can charge the Skoda Enyaq iV from a household 230-volt network in six to eight hours. A "fast" 125 kW terminal will replenish the battery from 10% to 80% in 40 minutes.
The Czechs also boasted about the crossover's interior. For the first time on a production Skoda, leather will be used, for tanning of which tannins obtained from olive leaves are used. Also noted is the 13-inch media center screen and a projection display with augmented reality.
