The front bumper of a car serves not only as a decorative element but also as an important protective part of the body. During operation or after an accident, it often has to be removed. Below is a detailed description of the process of removing the front bumper on a Lanos yourself, without going to a service center. We will also briefly consider the specifics of this procedure for models such as GAZ 2410, VAZ 2108, Toyota Avensis T25, and others.

What to do before starting work on the Lanos

Before you start removing the front bumper of the Lanos, you should prepare the car for work:
  • Place the car on a level surface.
  • Disconnect the battery (this is important if fog lights are built into the bumper).
  • Prepare the necessary tools: crosshead and flathead screwdrivers, wrenches 10 and 13, plastic spatulas (preferably).

Step-by-step instructions for removing the front bumper of the Lanos

  1. Remove the radiator grille.
    • It is held by clips and screws. Unscrew the screws and carefully pull the grille towards you.
  2. Unscrew the top bolts.
    • They are located under the hood — usually 3-5 pieces, securing the bumper to the body frame.
  3. Unscrew the screws in the wheel arches.
    • Turn the steering wheel fully to gain access to the fasteners. Inside the fender liners there are self-tapping screws that hold the side parts of the bumper to the fenders.
  4. Loosen the lower fasteners.
    • At the bottom of the car there are 4-6 bolts or self-tapping screws connecting the lower edge of the bumper to the engine protection or the reinforcement.
  5. Disconnect the electrical wiring.
    • If fog lights are present, disconnect the connectors with wires.
  6. Remove the bumper.
    • Gently pull the bumper towards you. It may additionally be held by clips — do not apply excessive force to avoid damaging the fasteners.

Useful recommendations and nuances

  • Clips require careful handling, especially on cars with mileage — they are fragile and break easily.
  • If the bumper does not give way, check whether hidden fasteners remain — they are often hidden by dirt.
  • Use gloves: they will protect your hands from cuts and abrasions.

Removing the front bumper on other cars

If you are interested in how to remove the front bumper on Nexia N150, Nissan Qashqai J10, Chevrolet Cruze, Mercedes W211, GAZ 2410, VAZ 2108, or Toyota Avensis T25, the general logic of actions is similar, but the fasteners are different for all. A brief overview of the specifics:
  • Nexia N150: bolts around the perimeter and clips. Special attention should be paid to the lower part.
  • Qashqai J10: many plastic clips, it is better to use special removers for the job.
  • Cruze: to completely remove the bumper, you will need to first remove the headlights.
  • W211: the bumper is attached to the fender liner and reinforcement; a lift will be needed for convenience.
  • GAZ 2410: old-style fastening — bolts at the corners and under the grille.
  • VAZ 2108: access to the fasteners is simple, there are few of them — convenient for repairs in garage conditions.
  • Toyota Avensis T25: many hidden screws, it is better to have a fastening diagram on hand.
Now you know how to remove the front bumper of the Lanos yourself. The main thing is to act without haste and carefully, then you will avoid breaking the fasteners and unnecessary expenses. For other cars, the principle is the same: remove the grille, unscrew the fasteners, and carefully separate the bumper from the body.