As a result, the price of tire fitting can be much lower than the damage to important body elements and the safety of further driving.
To avoid trouble, you should prepare thoroughly and study the specifics of tire fitting. Let's name 5 common mistakes made by car drivers.
Wheel blocking
Often when replacing a wheel, few people pay attention to the place where the work is done. Even if the tire is punctured on the road, you should choose the most horizontal surface. Wheel blocking is a mandatory condition, as the car can roll from the force applied while unscrewing the nuts.
It is better not to rely on a brick, board, or stone. Use the handbrake, fix the car in gear — neutral position is excluded.
Jack in the wrong place
The body of a passenger car has reinforced and weak parts. Beginners place the jack in the middle, in the thinnest part of the metal. To prevent the bottom from deforming, the jack should be placed closer to the wheel — where the body is most rigid.
The jack must be positioned strictly vertically, without tilting to either side: toward the rear or front. In this case, the car will be stable and will not give way to either side.
Worn-out set
The service life of tires is 5 years, regardless of intensity; tires cannot be used longer. Having lain in the garage as a spare, the tire will deteriorate, so you cannot postpone its use for a long time.
Another case is careless storage. Some car owners ignore the fact of tire care, throwing them in the garage immediately after removal. Before sending the wheels to storage, it is important to check:
- cleanliness of the tire surface;
- wear of treads;
- presence of a stuck nail or other foreign objects;
- curvature of the disc, if the tire is removed as a set.
You will save time, effort, and money if you learn how to store tires properly.
Tread pattern
Experienced drivers know how important it is to follow the rules of matching the pattern and direction of the tread. The quality of control and grip with the road surface depends on the depth and shape of the grooves. Tires are divided into symmetrical and asymmetrical, directional, and non-directional. Each option has features and purpose for a certain type of driving and road.
Markings help not to get confused. Arrows, inscriptions Outside and Inside determine the installation location of each tire.
Inappropriate tools
The car trunk should always have keys, tools, and a spare tire. However, not every driver cares about their availability. But even if there is a wheel wrench and a lever pipe, you should not tighten bolts and nuts with all your might:
- firstly, it will be difficult to unscrew them during subsequent replacement;
- secondly, you can strip the thread, which will lead to further troubles.
When going on the road, do not forget to check the wheel balancing. Also pay attention to the electrical wiring, which often causes short circuits, blown fuses, and failure of the entire car. You will find a worthy auto electrician at https://kiev.kabanchik.ua/category/avtoelektrika, with a wide range of prices, in all regions of Ukraine. Just set the filter by specifying search parameters. You can check the rating and customer reviews about the master.
