It is not surprising that there are now quite a few different magnetic holders on store shelves — after all, there are plenty of both cars and smartphones on the market. And if you also take into account the preferences of each driver and other little things, the choice really becomes more complicated. That is why below we have gathered a few recommendations that you should keep in mind when choosing a phone holder for your car<\/a>.<\/p>

Where to mount<\/h2>

Currently, there are models on sale that attach to the windshield, to the dashboard, or to the ventilation deflector. Fixation can be done with a suction cup, adhesive tape, or a special clamp. It is worth noting: holders on the windshield do not leave any marks from the suction cup or glue, but on the dashboard, traces of glue or even light scratches may appear. Some models with a vacuum suction cup can be attached not only to the glass but also to flat areas of the front panel.<\/p>

The disadvantage of mounting on the glass is that you have to reach further for the gadget — this is not always convenient, especially if the car's windshield is slanted and located far from the driver. Sometimes such a holder also blocks part of the view. However, the plus is that the phone is always in front of your eyes, and while driving you can avoid being distracted from the road.<\/p>

How the holder is attached<\/h3>

The most common and affordable methods are a vacuum suction cup, double-sided tape, and a clamp on the ventilation grille. High-quality double-sided tape is considered the most reliable, followed by the suction cup. Plastic clips on the deflector are the least stable option. Moreover, it becomes completely impractical when the airflow is turned on: cold or hot air can adversely affect the smartphone.<\/p>

If you choose tape, you need to decide on the mounting location in advance — if you later re-stick it elsewhere, the adhesion may be weaker, and the holder along with the phone will fall. The suction cup here is the complete opposite: it can be moved as many times as you like without worrying about reliability. But do not forget: on the dashboard, such an accessory may leave marks, and not everyone likes that.<\/p>

Power supply<\/p>

If the smartphone in the car is needed only for short trips, you can not worry about leaving room for a plug that sticks out from the side or bottom. Moreover, the cable may stretch and shift the phone — it will turn over or tilt. This is especially critical when the holder is not very securely fastened, for example, on a movable ventilation grille.<\/p>

Let us also mention a few advantages of magnetic holders compared to options where the phone is clamped from the sides:<\/p>

The phone is placed with one hand without extra effort;<\/p><\/li>

Access to the power connector and other ports remains open;<\/p><\/li>

The design is more compact and neater in the cabin;<\/p><\/li>

One holder fits smartphones of different sizes.<\/p><\/li><\/ul>

A few useful tips<\/strong><\/p>

The magnetic plate does not have to be glued to the body — you can simply put it under a tight case.<\/p><\/li>

If the disc is still glued to the back cover, it is better to place it in the center — so the gadget will not shift during sharp jolts due to disturbed balancing.<\/p><\/li>

Manufacturers of good magnetic holders usually promise reliable fixation for smartphones weighing at least 200 grams, and modern phones are usually lighter. However, before buying, it is worth testing the holder with your specific device to avoid surprises later.<\/p><\/li><\/ul>

When buying a car holder, it is advisable to test it not only with the smartphone but also in the car itself. It may turn out that the mount places the phone too close to the panel, creates glare in the sun, obstructs the view, or blocks access to some buttons. Today, you can usually arrange with the seller to check: leave a deposit and go out to the car to make sure everything is in place.<\/p>